How to Break and Remove a Concrete Slab

It's safe to say that breaking a concrete slab is one of the most challenging do-it-yourself tasks- almost impossible, to say the least. But, the fact of the matter is, you can do it yourself with the right approach. You only need to make sure you're using the right equipment and follow the right techniques. 

We will give you expert advice on how you can make this rather difficult task seem effortless. Whether it's your floor, parking space, or pathway, you can remove their concrete slabs. Note that concrete slabs are very durable so you will need heavy-duty equipment and practice safety precautions to get things done. If the job proves too difficult, contact a local concrete contractor.

Step 1: Wear Protective Gear

Breaking a slab is not the safest task there is. You will be required to use heavy equipment to complete the task. For this reason, it is important to protect yourself all the time. Wear a hard hat, earplugs, and safety goggles. It is also essential to keep your nose and mouth from small substances by wearing a face mask. Secure your body from loose debris by wearing boots and long-sleeved clothes.

Step 2: Prepare the Work Site

It's crucial to inspect the area before commencing the project. Check for any power, gas, or water lines underneath or near the concrete slab that you wish to break. Remove all debris, including rocks, leaves, sticks, and other tools.

Step 3: Ready Your Equipment

Breaking a slab entails using an electric breaker. You have to ensure that the power outlet or transformer you will use can handle the power of the breaker you will utilize. If you're ordering online, make sure to check the labels and instructions indicated in the manual. It will tell you the right kind of voltage the breaker needs to function. Some tools even come with specific safety precautions from the manufacturer.

Step 4: Get a Secure Grip

To remove a large concrete slab, you want to break it up into smaller portions. It is easier to break the slab and get rid of it completely if you do it this way. Start at the side which is farthest from you so you can use the part which hasn't been broken yet as your standing ground. You need a place to stand to support you when using the breaker. The power cord should always be behind you and not anywhere near the tip of the breaker.

Step 5: Start Breaking the Slab

Place the tip of the breaker on the cement and switch the power on. The equipment will begin to vibrate as it hammers into the cement until it breaks it. Make sure to hold the breaker upright and grip it firmly while on the process. The point of the breaker will continue to cause a crack on the slab until it's completely broken. Be careful and do the work slowly but surely. Avoid using the breaker in a diagonal direction because it can be hazardous to you and your property.

Step 6: Break it into Smaller Pieces

To make things easier, locate cracks in the concrete and work your way on them. This will make the work easier because the breaker will not have to put pressure too much on the surface. You should stop once in a while and get rid of debris that can hinder the process of breaking.

One of the most effective techniques in breaking a concrete slab is doing it using a grid pattern. Regardless of the size of the pieces you desire, you have to make sure that it's easy to eliminate the debris. Hold the breaker firmly when turning the power off and wait until it's no longer vibrating.

Step 7: Dispose of the slab

You can use a wrecking bar to reduce the size of the slab into even smaller portions. With the use of a shovel, pick up the pieces of concrete scattered on the floor. Use a broom to clear the area from dust and smaller debris.

Breaking and removing a concrete slab may be difficult, but it's possible. With the right tools and safe practices, you can do it on your own. Keep in mind that your safety is vital, so exercising caution while on the job is crucial. Wear the recommended safety gears for your protection

Source: concretecontractorswinstonsalem

EJ & Jr Concrete is a family owned, all our work is guaranteed. No matter the size of your project, we are ready to do. Effective planning is crucial to the successful completion of any project. Before starting the project, our team of experts will first assess your goals. Then we provide you with an estimate and time-line for completion. From beginning to end you will be involved every step of the way call at +1 832-216-4950.

 12 Concrete Slab

Concrete slab in Houston

Concrete Driveway in Houston, Concrete Patios in Houston, Concrete Sidewalk in Houston, Concrete Slab in Houston, Stamped Concrete Driveway in Houston, Stamped Concrete Patios in Houston, Stamped Concrete Sidewalk in Houston, Stamped Concrete Slab in Houston, Concrete Flatwork in Houston, Concrete Road Surface in Houston, Concrete Pool Deck in Houston, Concrete Garage in Houston, Concrete Interior Flooring in Houston, Concrete Foundation in Houston, Concrete Protection and Restoration in Houston, Stamped Concrete Flatwork in Houston, Stamped Concrete Road Surface in Houston, Stamped Concrete Pool Deck in Houston, Stamped Concrete Garage in Houston, Stamped Concrete Interior Flooring Stamped Concrete Foundation in Houston, Stamped Concrete Protection and Restoration in Houston, Stained Concrete Driveway in Houston, Stained Concrete Patios in Houston, Stained Concrete Sidewalk in Houston, Stained Concrete Slab in Houston, Stained Concrete Flatwork in Houston, Stained Concrete Road Surface in Houston, Stained Concrete Pool Deck in Houston, Stained Concrete Garage in Houston, Stained Concrete Interior Flooring in Houston, Stained Concrete Foundation in Houston, Stained Concrete Protection and Restoration in Houston, Epoxy Driveway in Houston, Epoxy Patios in Houston, in Houston, Epoxy Sidewalk Epoxy Slab in Houston, Epoxy Flatwork in Houston, Epoxy Road Surface in Houston, Epoxy Pool Deck in Houston, Epoxy Garage in Houston, Epoxy Interior Flooring in Houston, Epoxy Foundation in Houston, Epoxy Protection and Restoration in Houston.


Contact Us

Invalid Input

Invalid email address.

Invalid Input

Invalid Input

Invalid Input


  •   11603 BLAIR MEADOW DR, STAFFORD, TX 77477
  •   +1 (832) 971-2322
  •   This email address is being protected from spambots. You need JavaScript enabled to view it.

Copyright © EJ & Jr Concrete.
Web by LaraNet | Expand Your Business!